Struct regex_syntax::hir::literal::Literals[][src]

pub struct Literals { /* fields omitted */ }

A set of literal byte strings extracted from a regular expression.

Every member of the set is a Literal, which is represented by a Vec<u8>. (Notably, it may contain invalid UTF-8.) Every member is said to be either complete or cut. A complete literal means that it extends until the beginning (or end) of the regular expression. In some circumstances, this can be used to indicate a match in the regular expression.

A key aspect of literal extraction is knowing when to stop. It is not feasible to blindly extract all literals from a regular expression, even if there are finitely many. For example, the regular expression [0-9]{10} has 10^10 distinct literals. For this reason, literal extraction is bounded to some low number by default using heuristics, but the limits can be tweaked.

WARNING: Literal extraction uses stack space proportional to the size of the Hir expression. At some point, this drawback will be eliminated. To protect yourself, set a reasonable nest_limit on your Parser. This is done for you by default.

Implementations

impl Literals[src]

pub fn empty() -> Literals[src]

Returns a new empty set of literals using default limits.

pub fn prefixes(expr: &Hir) -> Literals[src]

Returns a set of literal prefixes extracted from the given Hir.

pub fn suffixes(expr: &Hir) -> Literals[src]

Returns a set of literal suffixes extracted from the given Hir.

pub fn limit_size(&self) -> usize[src]

Get the approximate size limit (in bytes) of this set.

pub fn set_limit_size(&mut self, size: usize) -> &mut Literals[src]

Set the approximate size limit (in bytes) of this set.

If extracting a literal would put the set over this limit, then extraction stops.

The new limits will only apply to additions to this set. Existing members remain unchanged, even if the set exceeds the new limit.

pub fn limit_class(&self) -> usize[src]

Get the character class size limit for this set.

pub fn set_limit_class(&mut self, size: usize) -> &mut Literals[src]

Limits the size of character(or byte) classes considered.

A value of 0 prevents all character classes from being considered.

This limit also applies to case insensitive literals, since each character in the case insensitive literal is converted to a class, and then case folded.

The new limits will only apply to additions to this set. Existing members remain unchanged, even if the set exceeds the new limit.

pub fn literals(&self) -> &[Literal]

Notable traits for &'_ [u8]

impl<'_> Read for &'_ [u8]impl<'_> Write for &'_ mut [u8]
[src]

Returns the set of literals as a slice. Its order is unspecified.

pub fn min_len(&self) -> Option<usize>[src]

Returns the length of the smallest literal.

Returns None is there are no literals in the set.

pub fn all_complete(&self) -> bool[src]

Returns true if all members in this set are complete.

pub fn any_complete(&self) -> bool[src]

Returns true if any member in this set is complete.

pub fn contains_empty(&self) -> bool[src]

Returns true if this set contains an empty literal.

pub fn is_empty(&self) -> bool[src]

Returns true if this set is empty or if all of its members is empty.

pub fn to_empty(&self) -> Literals[src]

Returns a new empty set of literals using this set’s limits.

pub fn longest_common_prefix(&self) -> &[u8]

Notable traits for &'_ [u8]

impl<'_> Read for &'_ [u8]impl<'_> Write for &'_ mut [u8]
[src]

Returns the longest common prefix of all members in this set.

pub fn longest_common_suffix(&self) -> &[u8]

Notable traits for &'_ [u8]

impl<'_> Read for &'_ [u8]impl<'_> Write for &'_ mut [u8]
[src]

Returns the longest common suffix of all members in this set.

pub fn trim_suffix(&self, num_bytes: usize) -> Option<Literals>[src]

Returns a new set of literals with the given number of bytes trimmed from the suffix of each literal.

If any literal would be cut out completely by trimming, then None is returned.

Any duplicates that are created as a result of this transformation are removed.

pub fn unambiguous_prefixes(&self) -> Literals[src]

Returns a new set of prefixes of this set of literals that are guaranteed to be unambiguous.

Any substring match with a member of the set is returned is guaranteed to never overlap with a substring match of another member of the set at the same starting position.

Given any two members of the returned set, neither is a substring of the other.

pub fn unambiguous_suffixes(&self) -> Literals[src]

Returns a new set of suffixes of this set of literals that are guaranteed to be unambiguous.

Any substring match with a member of the set is returned is guaranteed to never overlap with a substring match of another member of the set at the same ending position.

Given any two members of the returned set, neither is a substring of the other.

pub fn union_prefixes(&mut self, expr: &Hir) -> bool[src]

Unions the prefixes from the given expression to this set.

If prefixes could not be added (for example, this set would exceed its size limits or the set of prefixes from expr includes the empty string), then false is returned.

Note that prefix literals extracted from expr are said to be complete if and only if the literal extends from the beginning of expr to the end of expr.

pub fn union_suffixes(&mut self, expr: &Hir) -> bool[src]

Unions the suffixes from the given expression to this set.

If suffixes could not be added (for example, this set would exceed its size limits or the set of suffixes from expr includes the empty string), then false is returned.

Note that prefix literals extracted from expr are said to be complete if and only if the literal extends from the end of expr to the beginning of expr.

pub fn union(&mut self, lits: Literals) -> bool[src]

Unions this set with another set.

If the union would cause the set to exceed its limits, then the union is skipped and it returns false. Otherwise, if the union succeeds, it returns true.

pub fn cross_product(&mut self, lits: &Literals) -> bool[src]

Extends this set with another set.

The set of literals is extended via a cross product.

If a cross product would cause this set to exceed its limits, then the cross product is skipped and it returns false. Otherwise, if the cross product succeeds, it returns true.

pub fn cross_add(&mut self, bytes: &[u8]) -> bool[src]

Extends each literal in this set with the bytes given.

If the set is empty, then the given literal is added to the set.

If adding any number of bytes to all members of this set causes a limit to be exceeded, then no bytes are added and false is returned. If a prefix of bytes can be fit into this set, then it is used and all resulting literals are cut.

pub fn add(&mut self, lit: Literal) -> bool[src]

Adds the given literal to this set.

Returns false if adding this literal would cause the class to be too big.

pub fn add_char_class(&mut self, cls: &ClassUnicode) -> bool[src]

Extends each literal in this set with the character class given.

Returns false if the character class was too big to add.

pub fn add_byte_class(&mut self, cls: &ClassBytes) -> bool[src]

Extends each literal in this set with the byte class given.

Returns false if the byte class was too big to add.

pub fn cut(&mut self)[src]

Cuts every member of this set. When a member is cut, it can never be extended.

pub fn reverse(&mut self)[src]

Reverses all members in place.

pub fn clear(&mut self)[src]

Clears this set of all members.

Trait Implementations

impl Clone for Literals[src]

impl Debug for Literals[src]

impl Eq for Literals[src]

impl PartialEq<Literals> for Literals[src]

impl StructuralEq for Literals[src]

impl StructuralPartialEq for Literals[src]

Auto Trait Implementations

impl RefUnwindSafe for Literals

impl Send for Literals

impl Sync for Literals

impl Unpin for Literals

impl UnwindSafe for Literals

Blanket Implementations

impl<T> Any for T where
    T: 'static + ?Sized
[src]

impl<T> Borrow<T> for T where
    T: ?Sized
[src]

impl<T> BorrowMut<T> for T where
    T: ?Sized
[src]

impl<T> From<T> for T[src]

impl<T, U> Into<U> for T where
    U: From<T>, 
[src]

impl<T> ToOwned for T where
    T: Clone
[src]

type Owned = T

The resulting type after obtaining ownership.

impl<T, U> TryFrom<U> for T where
    U: Into<T>, 
[src]

type Error = Infallible

The type returned in the event of a conversion error.

impl<T, U> TryInto<U> for T where
    U: TryFrom<T>, 
[src]

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.